Didn’t you get a survey when you bought? Take that survey and go to fence company and order a fence built. Find out if a permit is needed to put up a fence, first.
It depends on the type of fence you want. Most fences are basically easy to do and you can do yourself. The hardest part really is digging the hole. You want to dig 2 foot down,put your pole in,pack a little of the dirt back in it nad then fill the rest with cement. Let dry 24 hours then put your fence up. All the hardware can be got where you get your fence. For the amount,just measure the area you want to fence.And your deed should tell you where your boundary lines are.
My husband and I remodel and do fences alot.
Didn’t you get a survey when you bought? Take that survey and go to fence company and order a fence built. Find out if a permit is needed to put up a fence, first.
yeas you do
rule number 1
First you need to make sure you can legally put a fence up.
From there you need a marked survey done.
you will need to find out the set backs too, and have those measured.
Next you obtain your permit and get 3-5 estimates on the actual work to be done.
It depends on the type of fence you want. Most fences are basically easy to do and you can do yourself. The hardest part really is digging the hole. You want to dig 2 foot down,put your pole in,pack a little of the dirt back in it nad then fill the rest with cement. Let dry 24 hours then put your fence up. All the hardware can be got where you get your fence. For the amount,just measure the area you want to fence.And your deed should tell you where your boundary lines are.
My husband and I remodel and do fences alot.